Our MARKETS
Our Markets
Since 1881, T.E. Ibberson Company has been setting the standard for designing and building innovative, cost-effective plants worldwide. For over 130 years, we have been an industry-preferred engineering and construction company, meeting and exceeding our clients’ expectations. Our capabilities include:
- Grain processing and storage
- Feed manufacturing
- Pet food manufacturing
- Flour milling
- Renewable fuels
- Food manufacturing
- Cement and mineral
- Specialty slipform
Our proven project execution processes; engineering & design; and design-build capabilities are among the best in the industries we serve.
As we seek to further support the industries we serve and expand our market presence, our execution capabilities include:
- Beverages
- Brewing
- Sanitary process design
- Ammonia refrigeration
- Packaging (liquids, dry and aseptic)
- Fluids handling
- Dry/bulk handling
- Industrial facility design
T.E. Ibberson Company is a wholly-owned subsidiary of The Industrial Company (TIC). For more information on TIC, visit www.tic-inc.com.
TIC – The Industrial Company is a wholly-owned subsidiary of Kiewit Corporation. For more information on Kiewit, visit www.kiewit.com.
Grain Export Elevator
Longview, Wash.
Ibberson was contracted for the design/build contract for a state-of-the-art feed, grain, wheat and grain by products export grain terminal.
Hughson Feed Mill
Hughson, Calif.
Ibberson was awarded the contract to design and build of the new poultry feed mill. This was one of three facilities being constructed on a site that included a high-speed rail unloading facility capable of unloading 110 car unit grain trains in approximately 12 hours.
International Grain Science Flour Mill
Manhattan, Kan.
Ibberson was contacted by Buhler, Inc. of Minneapolis to construct a slipformed flour mill for Kansas State University in Manhattan, Kansas. This state-of-the-art flour mill would be used for training milling students around the world. Through past successful projects with Buhler, we became the primary contractor for this project. Buhler, Inc. is a milling equipment supplier and process designer based in Switzerland with an office in Minneapolis, Minnesota.
Malt Expansion Project
Idaho Falls, Idaho
The original Idaho Falls malt plant had a production capacity of approximately 8 million bushels per year. The expansion project doubled the capacity to nearly 16 million bushels.
MGPY Ethanol Production Facility
Sauget, Ill.
This EPC contract project is located just across the river from St. Louis, Missouri, in Sauget, Illinois. Construction began in October, 2006 and mechanical completion was achieved in March, 2008. The plant is currently operating 24 hours per day, 7 days per week, 350 days per year and producing 54 million gallons of ethanol per year with future capacity to expand to 108 million gallons per year.
Hyperbolic Cooling Towers
Somerset (Brayton Point), Mass.
Ibberson was a joint venture partner for this Environmental Protection Agency mandated project to convert the Brayton Point Station in Somerset, Massachusetts, from an open cooling system to a closed loop cooling system.
South River Tunnel Pump Station Slipform
Atlanta, Ga.
The South River Tunnel project was a joint venture between Ibberson, Kiewit and Western Summit for the City of Atlanta, Georgia, and its effort to upgrade the water/wastewater infrastructure of that area. The project included the construction of a new underground pump station shaft which would have a finished diameter of 50 feet high and over 175 feet deep.
Agway Petfood Plant
St. Marys, Ohio
The $5 million petfood facility concept was formulated by the design team from T.E. lbberson Company (Ibberson) and the engineers from the Country Foods Division of Agway. The concept was then turned over to Ibberson's engineers and construction personnel who carefully worked through all stages of engineering, construction and start-up.
Oilseed Facility
Carrington, N.D.
AgGrow Oils contracted T.E. Ibberson Company (Ibberson) to provide complete turnkey work for their multiple oilseed facility in Carrington, North Dakota. The facility is unique because it is the first plant designed to process crambe, but the size and capacity (200 tons per day) allow the plant to process multiple products including oil and meal from crambe, sunflower, safflower, canola and rapeseed.
Sugar Refinery
Gramercy, La.
Ibberson provided civil and structural work for the process, screener building, bulk loadout, and dryer buildings, as well as installing mechanical equipment for this sugar refinery.
T.E. Ibberson is a subsidiary of Kiewit Corporation. This link will direct you to Kiewitjobs.com where you’ll find a comprehensive list of all Kiewit and subsidiary staff opportunities. If you would like to view T.E. Ibberson jobs only, use the search tool to narrow results.
T.E. Ibberson Company is a subsidiary of Kiewit Corporation. This link will direct you to Kiewitjobs.com where you’ll find a comprehensive list of all Kiewit and subsidiary staff opportunities. If you would like to view T.E. Ibberson Company jobs only, use the search tool to narrow results.
Featured Projects
Contact Ibberson
Home Office:
- 5601 Green Valley Drive, Suite 700
- Bloomington, MN 55437
- (612) 439-6700
General Info: